|
 19“ 1U interface expansion unit. Offers all interfaces for the entire conference room in the network in addition to the control. See "Specifications".
External GPIO Unit
19“ 1U interface expansion unit
▪ 10/100Mbit Ethernet
▪ 4 x unidirectional RS-232
▪ 8 optically isolated digital inputs
▪ 8 relay changers max. 48V / 60W
▪ 8 analog outputs 0-10V
▪ 8 analog inputs 0-10V
▪ 8 IR transmitters
▪ 1 IR receiver
▪ Connector for a 4 x 4 matrix keypad
▪ Integrated HTML and Telnet server
▪ Power consumption: 230V / 6W
▪ Dimensions (W x H x D): 483 x 44 x 140 mm
▪ Net weight: approx. 1,1 kg
|
|
|
 Internal slot card with watchdog and calender functions, relays, access contacts etc. Mounting to a slot belch or slot belches for all functions. No PCI slot necessary
iSGPIO Expansion Card
Internal slot card with watchdog and calender functions
▪ 4 optically isolated digital inputs
▪ 4 relay changers 48V / 60W
▪ 8 analog outputs 0-10V
▪ 8 analog inputs 0-10V
▪ 8 IR transmitters
▪ 1 IR receiver
▪ Connector for a 4 x 4 matrix keypad
▪ Connection over internal USB interface
▪ Net weight: approx. 100 g
|
|
|
 PCI Interface card for the iSMaster XL and the iSClient
I/O Expansion Card
PCI interface card
▪ For iSMaster XL and iSClient
▪ 8 digital inputs
▪ 8 relay changers 24V / 1A
▪ Net weight: approx. 100 g
|
|
|
 PCI interface card for use in combination with a IS-CC-IO-1 card for the iSMaster XL and the iSClient
I/O Expansion Card
PCI interface card
▪ Can only be used in combination with an IS-CC-IO-1 card
▪ For iSMaster XL and iSClient
▪ 8 digital inputs
▪ 8 relay changers 24V / 1A
▪ Net weight: approx. 100 g
|
|
|
 Relay module for top hat rail mounting. For direct operating of 230V consumers. Control via an RS-232 protocol.
8fold Relay Module
Relay module for top hat rail mounting
▪ 8 relay changers
▪ Contact load max. 235V / 8A
▪ Control via RS-232
▪ Power consumption: 235V / 1W
▪ Dimensions: 160 x 100 mm
▪ Net weight: approx. 300 g
|
|
|
 Relay module for top hat rail mounting. For direct operating of 230V consumers. Control via network.
8fold Relay Module
Relay module for top hat rail mounting
▪ 8 relay changers
▪ Contact load max. 235V / 8A
▪ Control over 10/100Mbit Ethernet
▪ Power consumption: 235V / 1W
▪ Dimensions: 160 x 100 mm
▪ Net weight: approx. 300 g
|
|
|
 Infrared emitter diode with integrated status display for the Master XS, iSMaster S, the external GPIO unit and the iSGPIO expansion card
IR Diode
Infrared emitter diode with integrated status display
▪ 2m connector cable with end splices
▪ For pasting on casing front
▪ For iSMaster XS, iSMaster S, external GPIO unit and iSGPIO expansion card
|
|
|
 IR Receiver for the iSMaster XS, iSMaster S, the external GPIO unit and the iSGPIO expansion card
IR Receiver
▪ For 38KHz carrier frequencies
▪ For mounting in cavity walls
▪ For import of IR codes
▪ As input for the iSMaster XS, iSMaster S, external GPIO unit and iSGPIO expansion card |
|
|
 Clamp terminal block for top hat rail mounting for the iSGPIO expansion card (IS-CC-GPIO) or the I/O expansion cards (IS-CC-IO-1/2)
Clamp Terminal Block 37-pole
Clamp terminal block for top hat rail mounting
▪ For solderless connection to a 37-pole D-Sub
▪ 37-pole connection cable incl. (2m)
▪ For iSGPIO expansion card or I/O expansion card
|
|
|
 Clamp terminal block for top hat rail mounting for the iSGPIO expansion card
Clamp Terminal Block 25-pole
Clamp terminal block for top hat rail mounting
▪ For solderless connection to a 25-pole D-Sub
▪ 25-pole connection cable incl. (2m)
▪ For iSGPIO expansion card
|
|
|
